Health Information and Tools > Tests & Treatments >  Laser Trabeculoplasty for Glaucoma

Main Content

Laser Trabeculoplasty for Glaucoma

Surgery Overview

Laser trabeculoplasty uses a very focused beam of light to treat the drainage angle of the eye. This surgery makes it easier for fluid to flow out of the front part of the eye, decreasing pressure in the eye.

There are two types of laser trabeculoplasty:

  • Argon laser trabeculoplasty (ALT).
  • Selective laser trabeculoplasty (SLT).

SLT uses a lower-power laser than ALT does.

For laser trabeculoplasty:

  • The doctor will put drops in your eye to numb the eye.
  • A special microscope (slit lamp) and lens (goniolens) are used to guide the laser beam to the canals (trabecular meshwork) where fluid drains from the eye.
  • The doctor makes small burns in the trabecular meshwork.
  • At the end of the surgery, the doctor will put drops in your eye to prevent eye pressure from rising right away.

Some people feel some pressure in the eye during the surgery.

What To Expect

You may need to be checked by the doctor within 2 hours of the surgery. You will also need to see the doctor for a follow-up examination.

Why It Is Done

Laser trabeculoplasty may be used to treat glaucoma that gets worse even with medicine treatment. It may also help treat older adults who have glaucoma and can't use medicines to treat it.

How Well It Works

Argon laser trabeculoplasty lowers the pressure in the eye about 75% of the time in people who haven't had surgery on that eye before.footnote 1 Research comparing ALT and SLT has shown that SLT lowers pressure in the eye about the same as ALT. People usually need to continue taking medicine after laser surgery to keep down the pressure in their eyes.

Control over the pressure inside the eye may decrease as time passes. Argon laser trabeculoplasty is often not effective when repeated. But experts believe that SLT may be repeated because it uses a lower level of laser and causes less scarring than ALT. SLT may be used if ALT fails to lower eye pressure. The results of repeated laser surgeries are less predictable than the results of the first surgery.

Risks

Complications of laser trabeculoplasty are rare. The most common complication of laser surgery for glaucoma is an increase in the pressure in the eyes. The pressure may be normal immediately after laser surgery and rise sharply within 1 to 4 hours after laser surgery. To prevent this problem, the doctor may put medicine in your eyes (such as apraclonidine or brimonidine) before or after laser surgery, especially in people with high intraocular pressure before laser surgery.

Other complications of laser surgery may include:

  • A brief period of inflammation of the coloured part of the eye (iris).
  • Cloudiness of the clear covering (cornea) over the iris. This usually does not last long.
  • Blockage of the drainage angle when the cornea and the iris stick together.
  • Pain.
  • Decreased vision.

Decreased vision is usually a temporary problem unless there is a significant rise in the pressure inside the eye. Very high pressures inside the eye can lead to permanent vision loss.

References

Citations

  1. American Academy of Ophthalmology (2020). Primary Open Angle Glaucoma (Preferred Practice Pattern). Ophthalmology, 128(1): 71–150. DOI: 10.1016/j.ophtha.2020.10.022. Accessed October 13, 2021.

Credits

This information does not replace the advice of a doctor. Healthwise, Incorporated, disclaims any warranty or liability for your use of this information. Your use of this information means that you agree to the Terms of Use. Learn how we develop our content.